Chain Effect Bracelet Project Download

Improve your soldering skills as you turn manufactured chain into fancy wire — and then make jewelry with your new stock!


SKU: EP17823

This product will be accessible from My Downloadable Products located in My Account after purchase.

Availability: In stock.

$4.00

Please, log in or register to or .

Free Shipping on US orders over $50

Details
Details

Create this stunning metal bracelet using soldering, bending, forming and straightening wire for a unique effect.

Skills: Straightening wire, Pick soldering, Stick soldering, Bending and Forming

Materials Needed to Complete This Project:

  • 2” of heavy 3.9mm sterling silver rolo chain
  • 20” 3.6mm sterling silver reverse double-rope chain
  • 7” of 12g round sterling silver wire
  • 4” of 20g round sterling silver wire
  • 24 20g jump rings with a 3mm inside diameter
  • Bracelet clasp and catch
  • Hard paste solder in syringe
  • 3 feet of hard solder - wire form
  • Tools Needed to Complete This Project:

    Design: Graph Paper, Pencil

    Hand: Pliers, cutters, bench pin, jeweler’s saw and 0/4 blades, non-marring yellow plastic-head mallet, nylon kitchen cutting board, permanent marker, Wubbers 8x4mm parallel rectangle mandrel pliers, flexible shaft and hand piece or cordless Dremel tool, Moore’s medium sanding disks and mandrel

    Soldering: Respirator or soldering ventilation system, magnification, 12”x12” soft Solderite soldering board cut in half, fine tweezers, several pairs of heat-resistant titanium cross-lock soldering tweezers, small T pins, air/acetylene Smith Silversmith torch with #0 tip and tank of fuel, Prips flux in spray bottle, sharp solder pick, deep pitcher of water for quenching, pickle pot, steel straight edge and small screwdriver.

    Forming: Ring mandrel, bracelet mandrel, 12mm round steel mandrel

    Finishing: Shot-filled tumbler setup, bench polisher, buffs and Fabulustre polishing compound, hot, soapy water and toothbrush

    Originally Published: Lapidary Journal Jewelry Artist, March/April 2019 Issue

    Additional Info
    Additional Info
    SKU EP17823
    Product Type Pattern Download
    Number Of Pages 6
    File Type PDF
    Author/Designer Betsy Lehndorff
    Technique Metalsmithing
    Project Accessories
    Difficulty Level Experienced
    Reviews
    Write Your Own Review

    Only registered users can write reviews. Please,

    Fulfillment Info

    Shipping Options
    For United States customers:

    Ground: $4.95 flat rate. Free shipping on orders over $50
    Estimated total shipping time (not including order processing time) is 2-8 business days. Includes tracking information.

    2nd Day Air: $19.95
    Estimated total shipping time (not including order processing time) is 2 business days; no P.O. boxes. 2nd Day shipping includes tracking information.

    Next Day Air: $49.95
    Estimated total shipping time (not including order processing time) is 1 business day; no P.O. boxes. Next Day shipping includes tracking information.


    For International customers:

    • Shipping Method —All orders are sent via Airmail. Please allow 4-6 weeks for your order to arrive.
    • Tracking information is not available for International orders at this time.


    International Air Printed Matter: $6.95
    Estimated total shipping time (not including order processing time) is dependent on final destination. For Canada, the estimated shipping time is 2-4 weeks. For other International Countries please allow for an estimated shipping time of 4-6 weeks.


    Digital Product Download
    When you purchase a downloadable item from our store, you have unlimited access to your purchase and can download it as many times and as often as needed.

    1. Go to https://www.interweave.com
    2. Click on “Sign Up/Sign In” at the top right corner.
    3. Sign in with your email and password
    4. Click on Welcome, (your name)! in the top right corner
    5. On the left side of the screen is a list of options. Click on MY DOWNLOADABLE PRODUCTS.
    6. Underneath the Product Title will be the download link. Click the link to view the PDF or Video.
    7. To save your purchases to your computer please do the following:
      *PC Users: Right click on the download link, select “Save Link As” (Firefox, Chrome) or “Save Target As” (Internet Explorer)
      *MAC Users: Hold the Ctrl button while clicking on the download link and select the option “Download Linked File As” (Safari)
    8. Save the download(s) to your “Desktop,” “My documents” or other favorite folder. Click Save.

    If you are having trouble opening your download, we recommend using the latest version of Adobe Reader for eBooks, digital magazine issues and patterns/projects. Get it here for free: https://get.adobe.com/reader/

    For videos, we recommend using VLC Player. Here is the link to access VLC download for free: http://www.videolan.org/

    Please let us know if we can be of further assistance.


    Online Workshops and Streaming Video

    If you have purchased an on-demand courses or video you can access your product immediately by following the directions below. If you have purchased course with a start date you can still access it by following the directions below but may be limited to what you can access until the course starts at the date that was described in the details section of the product you purchased. 

    1. Go to https://www.interweave.com
    2. Click on Sign Up/Sign In at the top right corner.
    3. Sign in with your email and password.
    4. Click on Welcome, (your name)! At the top right corner
    5. On the left side of the screen click on MY Workshops.
    6. Click Go to Course link to the far right of the course title. If nothing happens, verify that your pop-up blocker is off.
    7. If you are directed to a screen asking for your name and email address, fill in the information.
    8. You will be taken to your Dashboard, where you will see your course listed.
    9. Click on the teal button to the far right of the course title. It should either say Start Watching or Continue.
    10. Click the Play button to start viewing the course.
      *If there are course materials available, they will be found under the Menu tab at the top of the viewing window.

    To Access Online Workshop Materials:

    1. Click on the Menu tab.
    2. Click on Resources.
    3. You will see the number of Files available for the course.
    4. Click Files.
    5. Click View/Download to the right of the file title to access it.
    Most of our courses are not downloadable and must be accessed via streaming while logged into your account. You have unlimited access to your course and can view it as many times and as often as needed. For courses on desktop or laptop computers, you will have to allow pop ups on our website from your web browser. Many web browsers will display a small notification at the top of the page that reads "popup blocked" upon clicking "Go to Course." Click on this notification to enable popups on our site. This will allow you to view the course.

    If you do not see this notification, you simply have to navigate to your web browser's "settings" and disable your popup blocker there, or choose to allow popups on our site.

    For instructions on Chrome go to https://support.google.com/chrome/answer/95472?hl=en&co=GENIE.Platform=Desktop

    For courses on Apple mobile devices, such as iPad and iPhone, go into iPhone settings -> safari -> block popups and turn it off.
    Then when you click on "go to course" from your device's internet browser app, you will be asked to allow popups for this site. Choose yes, and you should be good to go.

    >!-- Top DY Banner code end -->