Ginkgo Leaf Pendant Project Download

Description

This piece is made using some soldering. If you do not solder, simply do not embellish the leaf with soldered silver balls.

Required Materials:

• 24-gauge sterling silver sheet, approximately 1.5″ square
• Sterling silver wire (can be scrap)

Tools: Rubber cement, soldering supplies, light grit sandpaper and/or fine steel wool (or other finishing materials), metal cutting shears or saw, hole punch or drill, riveting hammer or another hammer with a chisel-shaped end, steel bench block, torch and required soldering tools (if embellishing with silver balls), soldering brick, heat-resistant pliers, quench bowl, tumbler (optional)
Technique: Soldering (if embellishing with silver balls)
Originally Published: Easy Metal Jewelry 2015