Jewelry Making for Beginners: A Bundle of Instruction Tammy’s Top 4 Tips for Beginning Metalsmiths
Hello, beginning jewelry makers! I love meeting you at shows and such; it’s always a good time for me to remember the wonderful teachers who taught me jewelry-making techniques when I was a beginner. But I also love having the opportunity to talk to you, to discover what you want to learn, and hopefully offer some advice to help you along your path.
As a perk of this job, I’m in a good place to offer book and video suggestions–and that’s even easier for me to do now, with our new Beginner Basics: Jewelry-Making Essentials collection. You’ll get priceless information and tips in this bundle about jewelry-making tools, including how to buy them, how to use them, and even how to make them.
Once you’ve got tools under your belt (or in your belt, haha!), you can move on to Kim St. Jean’s DVD, Intro to Basic Jewelry Tools Through 6 Metal Earring Designs. You’ll watch and learn how to use jewelry-making tools, sure–but another great thing about this DVD is that you’ll learn beginner jewelry-making techniques like sawing, texturing, doming, riveting, and adding patina metal while you’re getting more familiar with the tools. The six designs are intended to be earrings, but you can also turn those shapes and designs into pendants, charms, or bracelet components. And because it’s from our Kitchen Table Metalsmithing series, you can trust that you won’t need a whole studio to do these projects!
In addition to all of that, you’ll get one of my favorite jewelry-making books, The Jewelry Maker’s Field Guide: Tools and Essential Techniques, by Helen Driggs. One of the things I love about this book is how extensive it is. Nearly any jewelry-making technique you can think of is in there–from texturing metal to setting stones and so much in between–as well as safety guidelines, studio setup, gemstone and metal information, plus a variety of other jewelry-making materials. The lessons are presented as building blocks, so your skills progress as you work through the book. By the time you hit the back cover, you’ll be oh-so-fabulous!
Clearly, this bundle has it all! But before you get started with it, I wanted to share some of my favorite jewelry-making tips with you. So here are five tips that I think will be especially helpful to beginners as you embark on this fun journey!
1. Soldering for Beginners
After I learned to solder, the first several times I tried it on my own, I had to remind myself what Lexi Erickson taught me: “Solder flows toward heat.” That little mantra helped me remember where to place my solder and where to aim my torch.
She also taught me her five rules of soldering: Fit. Clean. Flux. Solder Placement. Heat. Lexi says that if your solder won’t flow, check the rules. If your solder joins break, check the rules. No matter what goes wrong during soldering, check the rules.
- Did you file your edges well so they fit together perfectly? (Solder won’t fill gaps.)
- Is your metal super clean? (Oils from your hands act as a resist to solder.)
- Did you flux properly? (Flux helps you gauge temperature and predict when solder will flow.)
- Is your solder in the right spot? (Place solder under the seam whenever possible.)
- Did you heat the piece evenly? (You want solder to flow, not just melt, and . . . say it with me! “Solder flows toward heat.”)
No matter what goes wrong with soldering metal, one of these things is the most likely cause. Alternately, if you’re steadfast about following these five rules, you’ll have soldering success every time!
2. Fixing Copper Solder Mistakes
Learning to solder is a challenge, though a very fun and rewarding one. It’s wise to practice on copper, but if you don’t use copper solder (and sometimes even if you do), you’ll get an annoying silvery solder “ghost” around the join. The good news is that you can easily cover it with copper plating. Simply put the piece in your pickle pot and add in a piece of steel, such as a steel tool. Presto change-o, the particles of real copper that are suspended in your pickle plate the metal surface and cover up that silvery solder. This tip works best if your pickle is really green, meaning well used and saturated. Bonus: You get to feel like a magician!
Once you’re done, just remove the steel and your pickle is safe to continue using on silver. Be sure that no steel gets in your pickle while silver jewelry is in it, or you’ll copperplate the silver. If that does happen, you can remove it in a solution of half pickle and half hydrogen peroxide.
3. Filing and Sawing Tips for Beginners
Files can do more for you than just finishing edges. If you want to create a square inside metal you’ve pierced or create a perfectly round hole, for example, shaped files can make quick work of that for you. Lexi says that since your files are essentially just a bunch of saw blades side by side by side, “Your file is just a fat saw blade.” So if you have details in mind for your metal jewelry that would be difficult or too time-consuming to saw or pierce, let your files do the work for you. I use tiny half-round and round needle files to create easy scalloped edges and concave curves–details that would take a long time to saw.
4. Make Easy Ear Wires in Minutes
This was our tip of the year when I first shared it, but it’s still so hot, I’m just going to call it the best ear wire tip ever. It’s a technique as well as a tip, so hop over to see the whole thing and learn how to make perfectly matched, quick and easy ear wires in minutes–and see the bonus tip of how to store them.
I could go on and on, but you can find links to more helpful tips below. Some final pointers: save your scraps, wear safety glasses (seriously! I mean it!), and always work with proper ventilation.
Ready to jump in? Great! Grab your Beginner Basics: Jewelry-Making Essentials collection and you’ll be making metal jewelry before Santa makes his rounds!
Find more great jewelry-making tips for beginners and everyone else in these blogs: